|
Size:
5.0"x3.2"x1"
Weight:
Ir In Case
Yes
HotSync in Case:
Yes
Case Type
Leather
Held by:
Strap
Availability Unknown
$34.95
(w/ Clip)
$31.95
|
| User Opinions |
 |
83% |
 |
17% |
|
|
|
Must Have |
Got the slipper after a LOONG wait, but quite happy with it.
With my stowaway, some Post It Notes in the empty Springboard slot, my Pen Stylus, and the USB cable - I have everything I need to work on the road (hhmmm.. I take that back - the Glenayre module, the Xircom 802.11 SpringPort and GeoDiscovery's GPS will nicely round out the system)
With my Visor and Cell Phone clipped on, gosh - I feel like Batman with his utility belt.
Holly Guacamole!!! To the Batcave!!!!
by
JVMan |
|
|
Very Good Case |
The Slipper is very good, not perfect but the best I was able to find. Plastic over the buttons is OK, I'd prefer they had holes precut in the plastic so the buttons could be engaged directly. The velcro on my works fine. The Hot Sync is good, not always perfect. If I hold the Visor down in the cradle with 1 finger and very light pressure the Hot Sync is flawless, under its own weight, it works about 95% of the time. It would be nice if the cover were had a money slot in addition to the 2 card slots, it could then be a reasonable substitute for a wallet as well as a Visor case. It may not be perfect, but this is the best Visor case available and is available with or without the clip (mine is the version without clip)
by
Bob Skurka |
|
|
Great looking, shame about the velcro |
Overall a very nice looking case, on or off the belt.
I had problems syncing when I first got the case, but this was fixed by attaching the disk to the back of the Visor.
As mentioned in the main review the velcro fastenings are too small, and do not keep the flap securely closed, even without business cards in the flap.
Also I'm still undecided about the plastic over the buttons. I'm tempted to cut out holes over the buttons, but only if I can figure out how to do this without it looking a bodge.
by
Jim (Gloucster, England) |
|
|
Entirely supplanted the PalmIII belt case |
Nice looking case, got it inside of a week. Removal is easy once the case loosens up a bit. Swivel clip good for sitting/driving. Like the flip-up cover for holding a swipe/access card.
Syncing is a tad tempermental, haven't used the little disk yet. Works beautifully with the Stowaway.
Ideas for next incarnation: sleeve for stylus+ 4-in-1, back hole a little lower so slot is centered.
by
Matt Lucius |
|
|
Pretty Good Case |
After waiting for more than 4 weeks,
I finally got my case. Overall I
am satisfied, though I had some problems
with removing my Visor from the clip. I
had to disassemble the clip and bend it
to work properly. I like the look and feel
of it.
by
Jim |
|
|
No Sync = No Good |
Looks good, but when you cut out the sync functionality you might as well use a pad of paper. The Slipper eliminated my syncing capabilities.
by
Anonymous |
|
|
One Great Case |
Have had ZERO problems hotsyncing it since apparently now EB includes a hole in the back of the case, and a little disc sticker that goes over the notch in the visor. This allows the nub on the back of the cradle to hold down the visor for you.
Again, this is a great case for the visor.
by
Scott |
|
|
Hotsync sank it for me |
I got the EB Slipper and immediately disliked the plastic over the buttons. I took someone's advice and cut holes out for the buttons, but I still did not like it. Finally, hotsyncing remained a problem, and I decided not to use it anymore. It does look good, but it wasn't for me.
by
Harry |
|
|
Awesome case period!! |
The case is very classy and well designed. I had to hold the visor down to get a good hotsync. Im expecting this to improve as the case wears and forms better with time. The Clip is great. I dont mind wearing it at all.
by
Anonymous |
|
|
A great case - worth the wait |
I've had my case for two weeks, and I absolutely love it. When I ordered it, they said it would be 3 weeks backordered - it actually took 4, but I'm very happy with the product. Syncing is getting easier as the leather breaks in, and the plastic over the buttons is no problem for me at all. This is a slick, professional-looking case!
by
wtebbs |
|
